Qdx Stainless Steel Submersible Pump Farmland Drainage and Irrigation Garden Irrigation Pump Industrial Ponding Pump Aquaculture Pump

ISW Series Horizontal single-stage single suction centrifugal pump is a new generation of energy-saving and environment-friendly horizontal centrifugal pump developed by adopting the performance parameters of domestic general centrifugal pump on the basis of absorbing the advanced technology of similar products at home and abroad. This series of pumps has excellent performance, high reliability, long service life, reasonable structure and beautiful appearance, and has a high level in the industry.

Main purpose:
1. ISW horizontal clean water pump is used for conveying clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water supply of high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transmission, HVAC refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment matching. The service temperature T ≤ 80 ºC.
2. Iswr horizontal hot water pump is widely used in: metallurgy, chemical industry, textile, papermaking, hotels and other boiler hot water pressurized circulating transmission and urban heating systems. The service temperature of iswr is t ≤ 120 ºC.
3. Lswh horizontal chemical pump is used to transport corrosive liquids without solid particles and with viscosity similar to water. It is suitable for petroleum, chemical industry, metallurgy, electric power, papermaking, food, pharmaceutical and synthetic fiber departments. The service temperature is - 20 ~ C ~ + 120 ºC.
4. Lswb horizontal pipeline oil pump is used to transport gasoline, kerosene, diesel and other oil products or flammable and explosive liquids. The temperature of the transported medium is - 20 ~ C ~ + 120 ºC.

Working conditions:
1. Suction pressure ≤ 1.6Mpa, or high working pressure of pump system ≤ 1.6Mpa, i.e. pump suction pressure + pump lift ≤ 1.6Mpa, pump static pressure test pressure is 2.5MPa, please indicate the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6Mpa, it shall be put forward separately when ordering, so that the overflow part and connecting part of the pump can be made of cast steel during manufacturing.
2. Ambient temperature < 40 ºC, relative humidity < 95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of unit volume, and the particle size shall be less than 0.2mm.
Note: if the medium with fine particles is used, please indicate it when ordering, so that the manufacturer can adopt wear-resistant mechanical seal.

Product features:

Stable operation: the absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without vibration.
No leakage: cemented carbide seals of different materials ensure no leakage in the transportation of different media.
Low noise: the water pump supported by two low-noise bearings operates stably, and there is basically no noise except the weak sound of the motor.
Low failure rate: the structure is simple and reasonable, and the key parts are made of high quality materials; Supporting, the trouble free working time of the whole machine is greatly improved.
Convenient maintenance: it is simple and convenient to replace seals and bearings.
More economical land occupation: the exit can be left, right and up, which is convenient for pipeline layout and installation and saves space.